Wiskind One Piece Cleanroom Corner Systems is divided into three types, which are integrated One Piece Cleanroom Circular Corner system, One Piece Cleanroom L-shaped Corner system, One Piece Cleanroom T-shaped Corner system, factory prefabrication, direct stitching on-site, reducing the use of aluminum profiles, Make the cleanroom more beautiful, more conducive to cleaning and process sterilization.
One Piece Cleanroom Corner Systems
| Width |
The width on both sides and no more than 1180 mm
(Suggested equilateral 250 * 250 mm)
|
| Max Length |
6000mm |
| Wall thickness |
50mm |
| Steel Thickness |
0.4-0.8mm |
| Outer plate material |
PPGI,Al-mg-Mn Alloy steel,SS steel,Ti-Zn steel,HPL,VCM |
| Coating |
PE,PVDF,HDP |
| Core material |
Rockwool |
| Frame Thickness |
0.6mm |
| Application |
Pharmaceutical Clean Room, Electronic Clean Room, Food Clean Room, etc. |
The One Piece Cleanroom Corner Systems completely eliminates various corner joints between wall panels, factory prefabrication, on-site splicing, and module installation is convenient and quick. The panel coating and material are selected according to the use environment. The modular clean wall panel can directly open the hole and reserve the line pipe to improve installation efficiency. Cleanroom partition wall system core material diversified, there are rock wool, PU, EPS, paper honeycomb, aluminum honeycomb and so on. According to different environments, fireproof, heat preservation, noise reduction, moisture-proof, etc., choose different core materials, adapt to different cleanroom requirements.
Advantage:
1, The One Piece Cleanroom Corner Systems completely eliminates various corner joints between wall panels, factory prefabrication, on-site splicing, and module installation is convenient and quick.
2, Nearly the ultimate guarantee of smooth and smooth siding, avoiding joint cracking, dust and leakage affect the clean environment, more conducive to cleaning and process sterilization.
3, Cleanroom partition wall system core material diversified, there are rock wool, PU, EPS, paper honeycomb, aluminum honeycomb and so on. According to different environments, fireproof, heat preservation, noise reduction, moisture-proof, etc., choose different core materials, adapt to different cleanroom requirements.
4, The panel coating and material are selected according to the use environment. The modular clean wall panel can directly open the hole and reserve the line pipe to improve installation efficiency.
5, Widely used in cleanrooms such as pharmaceuticals, electronics, and food.
Production Technology:
1, Self-developed No.1 Automatic production line for cleanroom wall partition systems.
2, High-efficiency production line increases production capacity by 6 to 8 times.
3, Accurately measure and control sheet metal forming, gluing, core filling, composite molding and finished palletizing.
Wiskind sets up an independent quality assurance center, around the raw material inspection, auxiliary testing, product testing, process audits, laboratory testing five modules start work. Take active test mode, starting strictly controlled from the raw material into the plant. The production process was tracked and controlled.
In terms of on-site management, we implement TPM5S on-site management, full efficiency, full system, and full participation; C-TQC quality management system, always adhering to the "all members are quality control, quality zero defects, customer-oriented, improve and promote" The quality policy, strengthen the quality awareness of all employees, clarify the responsible person of each process quality, use the scientific method of total quality management, and implement quality control of all staff, comprehensive and whole process.
FAQ:
1. Are you a Factory/Manufacturer Or Trading Company?
We are a manufacturer with 41 years' experience of production and have a modern standard plant of 1,000,000 m².
2.How about your lead time?
It will take 3-7 days for budget and design according to the drawings after receiving the deposit. 15-30 days if there are some special sizes.
3. Can you sell products all over the world?
Yes, we have 4 subsidiaries, 13 offices, and more than 100 technical supervisors all over the world, providing timely and face-to-face service for customers.
4.How about your core competitiveness?
We have the first automatic production line in the world. Compared with the traditional manual production line, the production efficiency increased by 6-8 times, leading to most competitors. That means lower cost and higher quality.
5. Do you have your own construction team?
No, but all of our cleanroom panels and connected parts are easy for disassemble and installation due to our excellent design. What's more, we provided the instruction and videos for installation and we can send our professional supervisor to the site.
6. How many kinds of products do you have?
At present, we have more than 30 different products, including a cleanroom wall panel system, ceiling system, clean room door, clean room window and so on.
7. Can you provide samples? Is it free or extra?
Yes, we can provide samples for free, but we would appreciate it if freight to collect.
8. What are your terms of payment?
30% T/T prepaid, 70% T/T before delivery. We can discuss payment if we have more cooperation in the future.
If you want to know more about the products, please check our website:wiskindcleanroom.en.made-in-china.com
Welcome To Wiskind, We Will Be Your Trustworth Partner!
Audited Supplier 
){kind=link}
){kind=link}