Manufacturer of Clean Room Pass Box with UV Light

• Customization: Available
• Optional Accessory: Drum, Timer Switch, Intercom, Sterilization Lamp, Floodlight
• Noise: >100db
• Surface Treatment: Electroplating
• Inside Diameter: 800*800*800mm
• Installation: Embedded Type
• Operating Principle: Laminar
• Type: Self-Cleaning
• Material: SUS304 Stainless Steel
• Lock: Two Side Door Interlock Device
• Window: Double Layer Toughened Glass Window
• Nozzle: 4
• Filter: High Efficiency Filter (99.99%)
• Function: with Automatic Blowing and Dre
• Optional Accessories: Mechanical Lock
• Application: Biological Laboratory
• Transport Package: Wooden Pallet
• Specification: customized
• Trademark: Wiskind
• Origin: Bo′xing County, Binzhou City, Shandong Prov.,China
• HS Code: 7326909000

Product Description

Pass Box is a kind of auxiliary equipment in a clean room, which is mainly used for the transfer of small items between clean area and clean area, and between clean area and non-clean area, in order to reduce the opening frequency of cleanroom and reduce the pollution to the minimum level. Cleanroom Pass-through Box made of stainless steel plate, smooth and clean.The double door interlocks with each other, effectively preventing cross-contamination. It is equipped with electronic or mechanical interlocks and equipped with an ultraviolet sterilizing lamp.

Cleanroom Pass Through Box is widely used in micro science and technology, biological laboratories, pharmaceutical factories, hospitals, food processing industry, LCD, electronics factories and other places that need air purification.

Product Features:

1. The box is made of stainless steel SUS304 material, arc transition work area.

2. The doors on both sides are interlocked to ensure that the doors on both sides cannot be opened at the same time.

3. Built-in double-layer tempered glass window.

4. The clean delivery window has the function of automatic blowing and dousing, which can effectively remove the dust on the surface of the goods during the delivery process.



 

Configuration Description of the Clean Transfer Window:

1. 304 stainless steel material, the internal integral arc structure, easy to clean.

2. PAO injection interface and test interface, 304 stainless steel quick connector.

3. H14 tank sealed HEPA filter with a high-efficiency differential pressure table.

4. With ultraviolet sterilization lamp, sterilization time can be arbitrarily adjusted, and with sterilization timing and sterilization time cumulative function, can be arbitrarily set sterilization lamp and fan start at the same time.

5. Independently developed LCD panel controller, two magnetic lock interlock, automatic and manual two for the user to set, in the automatic mode has a variety of functions users can set, with time and function display, with call function.

6. The fan can be automatically started at the same time after closing the door.

7. Built-in door, double-layer black tempered glass, with desiccant.

8. Fan, customized fan, air supply time can be adjusted.

9. Design the fresh air inlet (located in the high clean area), increase the internal positive pressure, and adjust the air inlet volume.

10. Accept the user's special design.

 

Notes:

1. The transfer window is suitable for general transportation. During transportation, rain and snow should be prevented to avoid damage and rust.

2. The transfer window should be stored in the storeroom where the temperature is -10ºC~+40ºC, the relative humidity is no more than 80%, and there is no acid, alkali or other corrosive gases.

3. When unpacking the container, the container should be operated in a civilized manner. No rough or brutal operation is allowed to avoid personal injury.

4. After opening the box, please first confirm whether the product is the ordered product, and then carefully check the contents of the packing list to see whether there are missing parts and whether the parts are damaged due to transportation.


 

Operation Specification:

1. Wipe the goods to be transferred with a 0.5% peracetic acid or 5% iodine-volt solution.

2. Open the side door of the transmission window, quickly place the goods to be transferred, sterilize the transmission window with 0.5% peracetic acid spray, and close the side door of the transmission window.

3. Open the ultraviolet lamp in the transfer window and illuminate the object to be transferred for no less than 15 minutes.

4. Notify the experimenter or worker in the barrier system, open the transfer window inner door, and take out the item.

5. Transfer window a side door closed.
 

Installation Method:

Choose convenient position in-wall body, open a hole next, the hole is bigger than transfer window outer diameter 10MM or so commonly, put transfer window into wall body, install in-wall body commonly, maintain balance is fixed, will decorate the aperture of the transfer window and wall body with a round horn or other adornments, hot glue to seal to decorate can.

Founded in the late 1970s, Shandong Wiskind Steel Building Stock Co., Ltd (WISKIND stock code: 830906) focuses on R & D and manufacture of metal wall systems for construction metal houses. It is committed to providing customers with the most valuable building enclosures. A protection system as a whole solution. Through many years of unremitting efforts and persistent pursuit, has been the customer and the community unanimously approved, has been rated as national high-tech enterprises, provincial enterprise technology center, advanced private enterprises in Shandong Province, Shandong Province construction industry modernization production base, Shandong patent star Enterprises, Shandong Province Shou contract re-credit enterprises such as the honorary title, is ISO9001 & ISO14001 certified enterprises.