The Non-cold bridge partition wall system solves the condensation phenomenon and improves the overall insulation performance of the cleanroom, prolongs the service life of the plate and reduces the cost of replacing the plate.
Aluminium Honeycomb Non-cold Bridge Cleanroom Partition Wall Panel
| Width |
980mm |
| Max Length |
3000mm |
| Wall thickness |
50mm |
| Steel Thickness |
0.4-0.8mm |
| Outer plate material |
PPGI,Al-mg-Mn Alloy steel,SS steel,Ti-Zn steel,HPL,VCM |
| Coating |
PE,PVDF,HDP |
| Core material |
PU,Rock wool,Magnesium board,Paper honeycomb,Aluminium honeycomb,Plaster,EPS, etc. |
| Frame Thickness |
1.0mm Pvc :2.0mm |
| Application |
Low Temperature and high humidity Clean Room |
The four sides of the cleanroom panel are made up of steel keels and corners. In the low-temperature clean processing workshop or the cold season, condensation and condensation are likely to occur at the edge sealing. To this end, Wiskind's broken bridge keel partition wall system and insulated keel partition wall system provide perfection for this problem. The solution improves the overall insulation performance of the cleanroom, prolongs the service life of the plate and reduces the cost of replacing the plate.
Advantage:
1, The broken bridge partition wall system are connected by high-strength ABS corners, so that the overall structural strength of the frame is not affected, and in some low-temperature clean spaces, there is no condensation water around the border.
2, Improve the overall insulation performance of the cleanroom, prolong the service life of the plate and reduce the cost of replacing the plate.
3, This product is suitable for clean workshops in low temperature and high humidity environment.
Production Technology:
1, Self-developed No.1 Automatic production line for cleanroom wall partition systems.
2, High-efficiency production line increases production capacity by 6 to 8 times.
3, Accurately measure and control sheet metal forming, gluing, core filling, composite molding and finished palletizing.
Wiskind sets up an independent quality assurance center, around the raw material inspection, auxiliary testing, product testing, process audits, laboratory testing five modules start work. Take active test mode, starting strictly controlled from the raw material into the plant. The production process was tracked and controlled.
In terms of on-site management, we implement TPM5S on-site management, full efficiency, full system, and full participation; C-TQC quality management system, always adhering to the "all members are quality control, quality zero defects, customer-oriented, improve and promote" The quality policy, strengthen the quality awareness of all employees, clarify the responsible person of each process quality, use the scientific method of total quality management, and implement quality control of all staff, comprehensive and whole process.
Welcome to wiskind, we will be your trustworth partner!
Audited Supplier 
){kind=link}